View NTLUS4195PZ_4622630.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NTLUS4195PZ Power MOSFET
Features
-30 V, -4.0 A, mCoolt Single P-Channel, ESD, 1.6x1.6x0.55 mm UDFN Package
* UDFN Package with Exposed Drain Pads for Excellent Thermal * * * * *
Conduction Low Profile UDFN 1.6 x 1.6 x 0.55 mm for Board Space Saving Lowest RDS(on) in 1.6x1.6 Package ESD Protected This is a Halide Free Device This is a Pb-Free Device
http://onsemi.com MOSFET
V(BR)DSS -30 V RDS(on) MAX 90 mW @ -10 V 155 mW @ -4.5 V ID MAX -3.0 A -2.0 A
Applications
* High Side Load Switch * PA Switch and Battery Switch * Optimized for Power Management Applications for Portable
Products, such as Cell Phones, PMP, DSC, GPS, and others
Parameter Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current (Note 1) Steady State t5s Power Dissipation (Note 1) Steady State t5s Continuous Drain Current (Note 2) Steady State TA = 25C TA = 85C TA = 25C TA = 25C TA = 25C TA = 25C TA = 85C TA = 25C tp = 10 ms PD IDM TJ, TSTG IS TL ESD ID PD Symbol VDSS VGS ID Value -30 20 -3.0 -2.3 -4.0 1.5 2.3 -2.0 -1.5 0.6 -17 -55 to 150 -1.0 260 W A C A C A W 1 6 UDFN6 CASE 517AU mCOOLt G Units V V A D
S
MAXIMUM RATINGS (TJ = 25C unless otherwise stated)
P-Channel MOSFET
MARKING DIAGRAM
1 AC MG G
AC = Specific Device Code M = Date Code G = Pb-Free Package (Note: Microdot may be in either location)
Power Dissipation (Note 2) Pulsed Drain Current Operating Junction and Storage Temperature
Source Current (Body Diode) (Note 2) Lead Temperature for Soldering Purposes (1/8 from case for 10 s) Gate-to-Source ESD Rating (HBM) per JESD22-A114F
Class 1B
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Surface Mounted on FR4 Board using 1 in sq pad size (Cu area = 1.127 in sq [2 oz] including traces). 2. Surface-mounted on FR4 board using the minimum recommended pad size of 30 mm2, 2 oz. Cu.
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet.
(c) Semiconductor Components Industries, LLC, 2009
June, 2009 - Rev. 0
1
Publication Order Number: NTLUS4195PZ/D
NTLUS4195PZ
THERMAL RESISTANCE RATINGS Parameter Junction-to-Ambient - Steady State (Note 3) Junction-to-Ambient - t 5 s (Note 3) Junction-to-Ambient - Steady State min Pad (Note 4) Symbol RJA RJA RJA Max 85 55 200 Units C/W
ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified)
Parameter OFF CHARACTERISTICS Drain-to-Source Breakdown Voltage Drain-to-Source Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-to-Source Leakage Current ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Negative Threshold Temp. Coefficient Drain-to-Source On Resistance Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Threshold Gate Charge Gate-to-Source Charge Gate-to-Drain Charge VGS(TH) VGS(TH)/TJ RDS(on) gFS CISS COSS CRSS QG(TOT) QG(TH) QGS QGD td(ON) tr td(OFF) tf VSD tRR ta tb QRR VGS = 0 V, dISD/dt = 100 A/ms, IS = -1.0 A TJ = 25C TJ = 85C VGS = -4.5 V, VDD = -15 V, ID = -3.0 A, RG = 1 W VGS = -4.5 V, VDS = -15 V; ID = -3.0 A VGS = -10 V, ID = -3.0 A VGS = -4.5 V, ID = -2.0 A VDS = -5.0 V, ID = -0.2 A CHARGES, CAPACITANCES & GATE RESISTANCE 250 VGS = 0 V, f = 1 MHz, VDS = -15 V 60 40 3.2 0.2 1.0 1.5 ns 5.0 nC pF VGS = VDS, ID = -250 mA -1.0 3.8 75 120 1.3 90 155 S -3.0 V mV/C mW V(BR)DSS V(BR)DSS/TJ IDSS IGSS VGS = 0 V, ID = -250 mA ID = -250 mA, ref to 25C VGS = 0 V, VDS = -30 V TJ = 25C TJ = 85C -30 28 -1.0 -10 10 mA V mV/C mA Symbol Test Condition Min Typ Max Units
VDS = 0 V, VGS = 20 V
SWITCHING CHARACTERISTICS, VGS = 4.5 V (Note 6) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time Charge Time Discharge Time Reverse Recovery Charge 3. 4. 5. 6. VGS = 0 V, IS = -1.0 A 0.8 0.7 11 7.5 3.5 5.0 nC ns 1.2 V 30 95 50 70
Surface-mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [2 oz] including traces). Surface-mounted on FR4 board using the minimum recommended pad size of 30 mm2, 1 oz. Cu. Pulse Test: pulse width 300 ms, duty cycle 2%. Switching characteristics are independent of operating junction temperatures.
http://onsemi.com
2
NTLUS4195PZ
TYPICAL CHARACTERISTICS
20 18 -ID, DRAIN CURRENT (A) 16 14 12 10 8 6 4 2 0 VGS = -10 V -9.0 V -8.0 V 10 -7.0 V -6.0 V -5.0 V -4.5 V -4.0 V -3.5 V -3.0 V -2.5 V 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 -VDS, DRAIN-TO-SOURCE VOLTAGE (V) -ID, DRAIN CURRENT (A) 9 8 7 6 5 4 3 2 1 0 TJ = 25C TJ = 125C 1 1.5 2 2.5 VDS -10 V
TJ = -55C 3 3.5 4 4.5 5
-VGS, GATE-TO-SOURCE VOLTAGE (V)
Figure 1. On-Region Characteristics
RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) 0.250 0.225 0.200 0.175 0.150 0.125 0.100 0.075 0.050 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 ID = -3.0 A 0.250 0.225 0.200 0.175 0.150 0.125 0.100 0.075 0.050 0.025 0
Figure 2. Transfer Characteristics
TJ = 25C
TJ = 25C
VGS = -4.5 V
VGS = -10 V
0
2
4
6
8
10
12
14
16
18
20
-VGS, GATE VOLTAGE (V)
-ID, DRAIN CURRENT (A)
Figure 3. On-Resistance vs. Gate-to-Source Voltage
1.6 RDS(on), NORMALIZED DRAIN-TO- SOURCE RESISTANCE (W) 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50 -25 0 25 50 75 100 125 150 1 VGS = -10 V ID = -3.0 A 1000
Figure 4. On-Resistance vs. Drain Current and Gate Voltage
-IDSS, LEAKAGE (nA)
TJ = 150C 100 TJ = 125C 10 TJ = 85C 0 5 10 15 20 25 30
VGS = -4.5 V ID = -2.0 A
TJ, JUNCTION TEMPERATURE (C)
-VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 5. On-Resistance Variation with Temperature
Figure 6. Drain-to-Source Leakage Current vs. Voltage
http://onsemi.com
3
NTLUS4195PZ
TYPICAL CHARACTERISTICS
QT VDS QGS 3 9 2 1 0 VDS = -15 V ID = -3.0 A TJ = 25C 0 0.5 1 1.5 2 2.5 3 6 3 0 3.5 QGD VGS -VDS, DRAIN-TO-SOURCE VOLTAGE (V) 1.2 -VGS, GATE-TO-SOURCE VOLTAGE (V) 400 350 C, CAPACITANCE (pF) 300 250 200 150 100 50 0 0 Coss Crss 5 10 15 20 25 30 Ciss VGS = 0 V TJ = 25C f = 1 MHz 5 4 18 15 12
-VDS, DRAIN-TO-SOURCE VOLTAGE (V)
QG, TOTAL GATE CHARGE (nC)
Figure 7. Capacitance Variation
1000 -IS, SOURCE CURRENT (A) VGS = -4.5 V VDD = -15 V ID = -3.0 A t, TIME (ns) 10
Figure 8. Gate-to-Source and Drain-to-Source Voltage vs. Total Charge
100
tr tf td(off) td(on)
1
TJ = 150C
TJ = 25C
10
1
10 RG, GATE RESISTANCE (W)
100
0.1 0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
-VSD, SOURCE-TO-DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation vs. Gate Resistance
2.0 1.9 1.8 POWER (W) -VGS(th) (V) 1.7 1.6 1.5 1.4 1.3 1.2 -50 -25 0 25 50 75 100 125 150 ID = -250 mA
Figure 10. Diode Forward Voltage vs. Current
65 60 55 50 45 40 35 30 25 20 15 10 5 0 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 SINGLE PULSE TIME (s)
TJ, JUNCTION TEMPERATURE (C)
Figure 11. Threshold Voltage
Figure 12. Single Pulse Maximum Power Dissipation
http://onsemi.com
4
NTLUS4195PZ
TYPICAL CHARACTERISTICS
100 -ID, DRAIN CURRENT (A)
10
10 ms 100 ms
1 VGS > 4.5 V Single Pulse TC = 25C RDS(on) Limit Thermal Limit Package Limit 0.1 1 10
1 ms 10 ms dc
0.1
0.01
100
-VDS, DRAIN-TO-SOURCE VOLTAGE (V)
R(t), EFFECTIVE TRANSIENT THERMAL RESPONSE
Figure 13. Maximum Rated Forward Biased Safe Operating Area
90 80 70 60 50 40 30 20 0.2 10 0.1 0 1E-06 1E-05 1E-04 0.05 0.02 0.01 Duty Cycle = 0.5 RqJA = 85C/W
Single Pulse 1E-03 1E-02 t, TIME (s) 1E-01 1E+00 1E+01 1E+02 1E+03
Figure 14. FET Thermal Response
DEVICE ORDERING INFORMATION
Device NTLUS4195PZTAG NTLUS4195PZTBG Package UDFN6 (Pb-Free) UDFN6 (Pb-Free) Shipping 3000 / Tape & Reel 3000 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
5
NTLUS4195PZ
PACKAGE DIMENSIONS
UDFN6 1.6x1.6, 0.5P CASE 517AU-01 ISSUE O
D
2X
A B
0.10 C
PIN ONE REFERENCE 2X
L
L1
E
OPTIONAL CONSTRUCTION EXPOSED Cu MOLD CMPD
DETAIL A
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. DIM A A1 A3 b D E e D1 D2 E2 F G L L1 MILLIMETERS MIN MAX 0.45 0.55 0.00 0.05 0.13 REF 0.20 0.30 1.60 BSC 1.60 BSC 0.50 BSC 0.62 0.72 0.15 0.25 0.57 0.67 0.55 BSC 0.25 BSC 0.20 0.30 --- 0.15
0.10 C
DETAIL B
A
0.05 C 0.05 C
NOTE 4
(A3) A1 A1
SEATING PLANE
DETAIL B
OPTIONAL CONSTRUCTION
SIDE VIEW e
3
C
0.10 C A B F
1
D2 G
E2 0.10 C A B
6X
L
6 4 6X
DETAIL A
b 0.10 C A B 0.05 C
NOTE 3
D1 BOTTOM VIEW
mCool is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
6
EE EE EE
EE EE
TOP VIEW A3
SOLDERMASK DEFINED MOUNTING FOOTPRINT*
0.82 0.16 0.43 0.68
0.35 1.90 0.28 1 0.32
6X
2X
0.50 PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
NTLUS4195PZ/D

▲Up To Search▲

Price & Availability of NTLUS4195PZ

	To Download NTLUS4195PZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .